5T9M
Structure of rabbit RyR1 (Ca2+-only dataset, class 1)
ELECTRON MICROSCOPY
| Sample |
|---|
| RyR1-Cs2 complex |
| Specimen Preparation | |
|---|---|
| Sample Aggregation State | PARTICLE |
| Vitrification Instrument | FEI VITROBOT MARK IV |
| Cryogen Name | ETHANE |
| Sample Vitrification Details | Blotted for 3-4 seconds on both sides with Whatman ashless filter paper, blot force 3, wait time 30 seconds |
| 3D Reconstruction | |
|---|---|
| Reconstruction Method | SINGLE PARTICLE |
| Number of Particles | 55564 |
| Reported Resolution (Å) | 4 |
| Resolution Method | FSC 0.143 CUT-OFF |
| Other Details | The reported resolution is for the core. The resolution of the whole assembly is 4.1 Angstrom. |
| Refinement Type | |
| Symmetry Type | POINT |
| Data Acquisition | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Detector Type | GATAN K2 SUMMIT (4k x 4k) | ||||||||
| Electron Dose (electrons/Å**2) | 50 | ||||||||
| Imaging Experiment | 1 |
|---|---|
| Date of Experiment | |
| Temperature (Kelvin) | |
| Microscope Model | FEI POLARA 300 |
| Minimum Defocus (nm) | |
| Maximum Defocus (nm) | |
| Minimum Tilt Angle (degrees) | |
| Maximum Tilt Angle (degrees) | |
| Nominal CS | |
| Imaging Mode | BRIGHT FIELD |
| Specimen Holder Model | |
| Nominal Magnification | |
| Calibrated Magnification | |
| Source | FIELD EMISSION GUN |
| Acceleration Voltage (kV) | 300 |
| Imaging Details |
| EM Software | ||
|---|---|---|
| Task | Software Package | Version |
| IMAGE ACQUISITION | Leginon | |
| CTF CORRECTION | CTFFIND4 | 4.017 |
| MODEL FITTING | Coot | 0.8.5 |
| INITIAL EULER ASSIGNMENT | RELION | 1.4 |
| FINAL EULER ASSIGNMENT | RELION | 1.4 |
| CLASSIFICATION | RELION | 1.4 |
| RECONSTRUCTION | RELION | 1.4 |
| MODEL REFINEMENT | PHENIX | dev-2499 |
| Image Processing | ||||
|---|---|---|---|---|
| CTF Correction Type | CTF Correction Details | Number of Particles Selected | Particle Selection Details | |
| PHASE FLIPPING AND AMPLITUDE CORRECTION | ||||
